AUTOOL Brake Fluid Tester, Brake Fluid Moisture Detector

AUTOOL Brake Fluid Tester, Brake Fluid Moisture Detector

More Powerful Detection Range

• Automotive Brake Fluid Detector is common fit for most vehicle. Check the health status of DOT-3, DOT-4, DOT-5.1 brake fluid and also most synthetic brake fluids. The brake fluid tester is designed with normal mode and expert mode. The expert mode is convenient for professional mechanics to select the corresponding brake fluid model for accurate testing. 

Precision test and sensitive probe

• Equipped with a highly sensitive sensor and a 260mm foldable hose, can quickly and accurately detect DOT-3, DOT-4, DOT-5.1 brake fluid and has received the result in seconds. The outer layer of the hose is made of 304 stainless steel, which has the characteristics of oil resitance, oxidation resistance, and corrosion resistance. The foldable probe can rotate 180 degree,you can choose any angle to testing. 

Easy Instant Read

• 2.8 inches high resolution screen, instant display result, large display with backlight, easy and clear reading in sun or night. In addition, if the brake fluid contains too much water, the buzzer will alarm to remind you to change the brake fluid. 

Water Content Percentage

• OK icon indicates that the moisture content is between 0% and 2%. The brake fluid performance is fine; The 🔺 icon indicates a moisture content of 2% to 3%. The brake fluid performance is OK, but it need to be detected and observed in the near future; The × icon indicates that the moisture content is above 3%. The brake fluid performance is poor, it need to be replaced.

Operation Procedure

1. Wipe the test probe clean.
2. Open the brake fluid reservoir cover.
3. Select the type of brake fluid to be tested.
4. Dip the test probe into the brake fluid.
5. Press the button to start the test.
6. The measurement result will be displayed on the screen.

Speifications

• Wet boiling point range: 140 °C ~ 205°C (284°F ~ 401°F) ±5%
• Dry boiling point range: 160 °C ~ 320 °C (320 °F ~ 608 °F)
• Working Voltage: 6V(4 × 1.5V batteries)
• Detection time: 16 seconds
• Working temperature range: -10 °C ~ 60 °C